These are the standard Hitches for the Electrodrive Powered Tug Range.
Hitches are Priced on the Application
Special Hitches are also available to suit your application - Please get in touch with the office on 02) 9457 2700.
HITCH TYPE | PART NUMBER | SUITABILITY | TYPICAL APPLICATION | |
Pin hitches | EDHT1316 | 16mm diameter | Tug Compact, Tug Axis 1T & 2T | Trolley drawbar: Eg. Meal Trolleys and stock trolleys. Pin Hitch can also be mounted upside down for spring-loaded drawbars (That push up). The pin hitch enables vertical and horizontal movement when fitted to Tug Compact & Tug Tough. NB: When fitted to Tug Axis, the turret must be locked to disable pivoting; otherwise, uncontrolled movement will occur. |
EDHT1316 | 19mm diameter | Tug Compact, Tug Rise, Tug Axis range 1T, 2T, 4T & 5T | ||
EDHT10TPIN | 32mm diameter | Tug Tough 10T | ||
EDHT10TPIN50 | 50mm diameter | Tug Tough 10T | ||
Auto-latching hitch | EDHT1810-024 | Tug Rise 1T and Tug Axis range 1T, 2T, 4T & 5T | Most common trolley hitch. Requires a 25mm towbar (EDHT1010) Existing tug applications Industrial, heavier-duty trolley with loads of 1-2T |
|
Clamp Hitches | EDHTCLAMP001 (general duty) | Recommended hitch height 450mm off the ground | Tug Compact, Tug Axis 1T & 2T | Trolleys without an existing hitch point: Eg. Linen trolleys, roll cages and trolleys with wire mesh sides |
EDHTCLAMP002 (heavy duty) | Tug Rise 1T | |||
Groove Hitch | EDHTGROOVE0484 | Tug Axis 1T & 2T | Locks tubs from inside the handle grooves. Used for trolleys with an exposed or open frame to grab from the outside: Eg. Rotomoulded Linen Trolleys with slotted handles |
|
Tow ball A-Frame Hitch | EDHT1810-023 | It can be manually adjusted to suit a height of 500-600mm from the ground | Tug Axis range 1T, 2T, 4T & 5T | Single Axis Trailers, Boat Trailers and Caravans fitted with standard 50mm tow ball coupling and jockey wheel to lower the load over the tow ball |
Double Wheelie Bin Hitch | EDTWINBINHITCH | Tug Compact, Tug Axis range 1T, 2T, 4T & 5T | Moving 2 x 80L - 240L Wheelie Bins at a time. Simply lift the handle to hitch and unhitch the bins |
|
600 & 1100 L Bin Hitches | EDUNIBH6611F (Front hitching bracket) |
Universal hitching brackets fit between castor plates and a bin for maximum strength. | Tug Rise, Tug Axis range 1T, 2T, 4T & 5T | Tow 1 or more wheelie bins up ramp up to 14 degrees. Tow pins secured by R-pins. Required 2 x Directional lock tabs (LMDBLSULO) or 2 x directional locking castors fitted to the bin. This ensures controlled and straight-line towing, i.e. the bins do not fishtail whilst in tow. |
EDUNIBH6611R (Rear hitching bracket) |